We now have two versions of our extensions. One with a heim joint and the other has a
grade 8 stud. The stud version allows you to reuse your stock frame mount after it is moved
back. The stud is the same length as the stud on the end of the stock radius arm. These
extensions thread onto the existing threads of your radius arm to ensure every thing is
straight before welding. The extensions add about 10-1/2" to the over all length of the radius
arm. They can also be viewed in Bronco Driver issue 13 page 64. The cost of the extensions
are $135 dollars plus shipping for the pair.
grade 8 stud. The stud version allows you to reuse your stock frame mount after it is moved
back. The stud is the same length as the stud on the end of the stock radius arm. These
extensions thread onto the existing threads of your radius arm to ensure every thing is
straight before welding. The extensions add about 10-1/2" to the over all length of the radius
arm. They can also be viewed in Bronco Driver issue 13 page 64. The cost of the extensions
are $135 dollars plus shipping for the pair.
Other Products
Here you will find other products that we
offer. Please check back as we continue
to bring you new items.
offer. Please check back as we continue
to bring you new items.
For those who want to tie the tie rod and drag link together to achieve the proper angle with
the track bar. It can also be used for a ram assist setup.
The Saddle slides over the tie rod and is then welded into place. It is made from 1/4"
material and comes with a 3/4" grade 8 bolt, all metal lock nut and washers.
The cost of the saddle is $50 dollars plus shipping.
the track bar. It can also be used for a ram assist setup.
The Saddle slides over the tie rod and is then welded into place. It is made from 1/4"
material and comes with a 3/4" grade 8 bolt, all metal lock nut and washers.
The cost of the saddle is $50 dollars plus shipping.
Radius Arm Extension with Heim Joint
Steering Saddle
Adjustable Track Bars
Our track bars are made from the same material as our steering, 1-1/4" DOM tubing
and powder coated gloss black. The track bars come with all necessary grade 8
hardware for installation.
Please let us know if you do not require an offset bent into your track bar. The cost is
$130 plus shipping for Early Broncos and $140 plus shipping for full size trucks.
and powder coated gloss black. The track bars come with all necessary grade 8
hardware for installation.
Please let us know if you do not require an offset bent into your track bar. The cost is
$130 plus shipping for Early Broncos and $140 plus shipping for full size trucks.
Extreme Flex Heims
These heims have a full 40 degrees of articulation! The most the market has to offer.
The heim is a 3 piece construction heavy duty joint. The body is 4340 steel, heat treated,
zinc plated and chromate treated. The ball is 52100 steel with hard chrome plating. The
race is steel alloy, heat treated, zinc plated and chromate treated. This joint has a static
load rating of 38,701 pounds.
Cost with steering is $60 each and $75 each without.
The heim is a 3 piece construction heavy duty joint. The body is 4340 steel, heat treated,
zinc plated and chromate treated. The ball is 52100 steel with hard chrome plating. The
race is steel alloy, heat treated, zinc plated and chromate treated. This joint has a static
load rating of 38,701 pounds.
Cost with steering is $60 each and $75 each without.
 |  |  |  |
Radius Arm Extension with Grade 8 Stud
NEW
Steering Box Girdle
Large tires and locked axles apply a tremendous amount of force to our frames and steering
boxes. Many of us have experienced our frames cracking and the steering boxes moving
under heavy loads. Stone Crusher’s steering box girdle made from 1/4” plate not only
reinforces the frame but also supports the steering box to help prevent these problems. It
mounts to the inside of the frame using the stock steering box bolts. Four supplied bolts go
through the girdle and into the top of the steering box.
$90.00 plus shipping
boxes. Many of us have experienced our frames cracking and the steering boxes moving
under heavy loads. Stone Crusher’s steering box girdle made from 1/4” plate not only
reinforces the frame but also supports the steering box to help prevent these problems. It
mounts to the inside of the frame using the stock steering box bolts. Four supplied bolts go
through the girdle and into the top of the steering box.
$90.00 plus shipping
To go along our heim joint style extensions, we are now offering frame mounting
brackets. Made from 1/4" material, the brackets sandwiches the frame. Insuring a
good solid mount, they come up 3 inches on each side. The brackets come as a set
for $45 plus shipping.
brackets. Made from 1/4" material, the brackets sandwiches the frame. Insuring a
good solid mount, they come up 3 inches on each side. The brackets come as a set
for $45 plus shipping.
Radius Arm Extension Brackets